Basic Info.
Product
Photocatalyst Mosquito-killing Lamp
Pest Control Type
Swatters
Product Name
Mosquito Killing Swatter
Function
Kill Mosquito+ Killer Insect
Keywords
Electronic Mosquito Killer
Commercial Buyer
Super Markets
Types
Battery Powered Ultrasonic Pest Repeller
Transport Package
Color Box + Carton Box
Specification
23*4.5*30cm
Product Description
Product Parameter:
name:Electric mosquito swatter
material:ABS
color:green and white
size(cm):product size:23*4.5*30cm packing size:24.5*5.5*24.5cm
P(W):2w
A(V):5v
Power supply mode: USB
G.W.(G):320g
N.W.(G):250g
Instructions
1.When charging, first push the power switch to the off position,and then insert the tail of the electric mosquito swatter into the USB charging base of the product, and the charging indicator lighton the product flashes; it is suggested that when using the (two inone)mosquito catching mode,it is better to connect the power lineto the charging head, which can better protect the battery life, andthe charging time is about 4 hours;
2.Conventional mosquito control method: push the powerswitch of the product to on position,hold the highvoitage switch button,andthe high-voltagework indicator light is on.At this time,the powergrid is under high voltage. Wave the racket to make the power gridcontact with mosquitoes, and the mosquitoes will be killed immediately;Release the high-voltage switch button and the high-voltage workindicator will go out.At this time,there istill residual voitage inthe power grid. Please do not touch the power grid. The power will be cut off immediately in 3 seconds;
3.Electric shock mosquito trap method: push the power switch of the product to on2-must-position,at this time, the purple LED lights up and the power grid is closed.When there is ahigh voltage,plug theUSB charging cable into the charging port of the electric mosquito swatter to connect the adapter.At this time, the two in one automatic mosquito catching mode starts.When mosquitoes and other harmful insects contact the electric mosquito swatter power grid, they will be killed immediately;
4.Turn off the mosquito killing function of the product: push the powerswitch to the off position
Matters needing attention
1. When the electric mosquito swatter works, the power grid has high voitage! High voltage danger, keep away from children,beware of children's electric shock; Do not touch the power grid with hands or metal objects;
2.Do not use this product in places with flammable and explosive gases or liquids, and do not use metal and other conductive materials to spark on the power grid;
3. in order to ensure the service life of the battery, if there is no obvious effect in hitting mosquitoes during use, or the 25% battery power indicator flashes, it means that the battery power has been basically used up, please stop using and charge it in time,otherwise when the voltage of the lithium battery is lower than 2.8V,the product will enter the protection state with the built-in low-voltage protection function, and the product will not work,At this time, it must be charged before use; three thousand
4. Please keep away from inflammables,explosives and chemicals during the charging process due to the slight temperature rise of charger and lithium battery;
5. When not in use,please push the power switch to the off position to avoid exhausting the battery
6.Lithium batteries have self discharge characteristics. It is recommended to charge the products before the first use; if it is not used for a long time, the battery should be fully charged and stored,and the product should be charged every three months;
7.Do not use wet towel to wipe or water to wash the mosquito carcasses on the power grid. After each use, you can use a long hair soft brush or tap a few times to remove the mosquito carcass (the mosquito carcass may cause power grid short circuit and damage the electric mosquito racket, please remove it in time);
8.When the climate is humid, the mosquito swatter may absorb moisture without high pressure or become low pressure,
and the killing effect will be reduced.It should be dried in time with an electric hair dryer or in the sun, and the function of the mosquito swatter can be automatically restored;
9.Please do not use this product to pat other hard objects or pinch the net surface of this product to avoid damaging the power grid;
10. The battery is included in the product.At the end of its service life, the battery should be stored in a suitable place to avoid
environmental pollution. The scrapping should be in accordance with local laws and regulations;
11. Please operate in strict accordance with the instructions and precautions, and do not disassemble at will. Our compa will not be responsible for any adverse consequences caused by illegal operation;
12. This product is suitable for indoor use;
Warning! The utensits should be kept away from childiren. The utensits are not suitable for barns, anima sheds and similar places; When charging and working. the electronic mosquito kiling racket is strictly prohibite to contact the metal mesh, and it is strictly prohibited to use in the environment of combustible gas, gas, explosive materials and dangerous chemicals.
Address:
No. 601, Gaosi Road, Furong Street, Changde, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories, Bags, Cases & Boxes, Computer Products, Consumer Electronics, Electrical & Electronics, Furniture, Light Industry & Daily Use, Lights & Lighting, Tools & Hardware, Toys
Management System Certification:
ISO 9001
Company Introduction:
Hunan Yifan Electronic Technology Co., Ltd is an experienced company which specialized in business of electronic products and smart appliance such as Circulation Fan, bladeless fan, Mite remover, humidifier, Shoe dryer, Beauty mirror/table lamp, sweeper, electric Heater, hand warmer, etc.
We are dedicated to strict quality control and thoughtful customer service, the experienced staff will always be glad to address your requirements and ensure full customer satisfaction. Welcome OEM and ODM orders, any questions or needs please feel free to contact our customer service center.