Basic Info.
Classification
Lighting/Power
Standby Time
Long-acting Machine
Standby UPS
Sine Wave Output UPS
Output Capacity
Small Type
Equipment Mode
Centralized Model
Product Description
Product description:
1.The world lightest and smallest UPS Power supply with intelligent CPU control mode, key switch control each output
2.LED display plus the most state-of-the-art power lithium battery technology and strong output energy, high current output,AC modified sine wave
3.This product possesses microcomputer timer function, it can be configured to system start charging time, and the system will launch the start charging time function at the set time point.
4.It can apply to all mobile power supply requirements of the product
Product paramer:
| Product parameter | parameter values |
| AC Input Voltage | AC 90V-140V 55/60Hz or AC170-260V50/60Hz |
| Charge Input Solar Panel(Optional) | Voltage 18V 20-100W Transfer effiency≥15% |
| Solar Panel Voltage | 12.75V±0.075V |
| Battery Capacity: | Lithium battery 12V 26Ah 288Wh |
| Lithium battery inner current wastage | ≤50uA |
| Inner Transformer Empty-load Current | ≤0.3A |
| Inner Transformer Over-load Protection | ≤600W |
| Inner Transformer Less Voltage Protection | ≤8V |
| Inner Transformer Temperature Protection | ≤80°C |
| Inner Transformer Output | 100V 55HZ/110V 60Hz/120V 60Hz/230V 50Hz |
| Inner Transformer Effiency | Rated:500W Peak:1000W |
| The Reaction Time: | ≤5MS |
| DC Output(4 ports): | 12V/8A (10A MAX) |
| USB Output(4 ports) | can charge any mobile and for IPAD |
| LEDLED Lighting: | 1W ,Max Can be 3W |
| Weight (Nw/ Gw): | 3.2kg/3.5kg |
Matters need attention:
1 This product contains lithium-ion battery, keep away from fire, dispose appropriately.
2 Do not use this product in a humid environment or near water, pay attention to keep dry, as far as
possible use only in a dry environment.
3 Handle gently, do not drop, hammer, or pierce with a sharp object.
4 In the event that the power supply emit smoke, fire, or any other phenomena, should immediately
stop using, power it off and unplug all connected devices. In case of fire, the use of fire extinguishers is necessary, due to the chemical composition of lithium battery, do not use water! May cause
5 Always ensure the power supply is used in a ventilated environment to prevent overheating. When
overheated, the power supply will shut down for self-protection.
6 Should be paid attention to when using this product power supply, to boot, and then choose DC or AC, confirming that the output, LED lights, to use again
7 Use this product for the first time, after should put all the internal battery, recharge
8 This product for a long time need not when, should take a charge in three months, it can ensure the service life of batteries
Charging process:
1.Plug in the AC input power cord to the wall socket and connect to the UPS. Then connect your device load to the UPS-NB20. Turn on AC mains power, then turn on AC power on/off switch on UPS-NB20.When the AC mains power (wall socket) is normal, your devices will draw power directly from the AC mains. (wall socket). At the same time, it will charge the UPS-500 as well, the LED light on the front panel will indicate RED on charging and GREEN when full.
Address:
Puwei Road No. 4, 1582 Lane, Fengxian District of Shanghai Province, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Shanghai JQ Technology Equipment Co. Ltd is private limited liability company which specializing in professional products design and producing iPad charge cabinet(cart)\tablet charge cabinet(cart)\laptop charge cabinet(cart)\3 d printers, electronic password store cabinet, moving work bench, non-standard desks. The headquarter of our company is located in Shanghai. JQ TECHNOLOGY have a complete and scientific quality management system. At the same time, her integrity, strength and product quality obtain industry acceptance.
