Product Description
Company Info
Product Description
AE-780 Surface Resistance Meter is:
1. Portable and light weight
2. Ultra wide-range, battery operated
3. With probes usage
AE-780 Surface Resistance Meter
The AE-780 is a light weight, pocket sized, auto ranging surface Surface Resistance Meter. It is designed to test conductive, anti-static, and static dissipative surfaces for electrical resistivity according to the ESDA's parallel resistivity probe method DIN EN 100 015/1 & ANSI/ESD-S11.11.
If meter is purchased with the accessory kit, it will comply to IEC 61340-4-1, ANSI/ESDA S1.4 & ANSI/ESDA S. 7.1 when the five punch electrodes are used.
AE-780 Surface Resistane Meter Includes:
Tester
Two accordion cables (stereo to banana)
9 volt battery
Certificate of calibration
AE-780-1 Accessory kit:
Two 5lb probes
Foam lined carrying case
Limits:
Resistivity: 10e3-10e12 ohms/sq
Resistance: 10e3-10e12 ohms
Measuring voltage: 10v and 100v
Specification:
Dimension: -approx. 173x76x30mm
Weight: -approx. 103 grams
Power: - Battery operated 9V
Connections: - 2x3.5mm jack plug for each earth connection
Test range: 10e3 to 10e 12
Dissipative range: 3x10e5 to 3x10e9 1/2 decade between each decade on a logarithmic scale
Example: 1x105x2.31=3x10e5 (1/2 decade measurement) x3.21= 1x10e6
Method of measurement:
Surface Resisitivity: (ohms per square)
Point to Point resistance: (ohms)
Accuracy: +/-0.5 decade in conductive range
+/-0.25 decade in dissipative range
1. Portable and light weight
2. Ultra wide-range, battery operated
3. With probes usage
AE-780 Surface Resistance Meter
The AE-780 is a light weight, pocket sized, auto ranging surface Surface Resistance Meter. It is designed to test conductive, anti-static, and static dissipative surfaces for electrical resistivity according to the ESDA's parallel resistivity probe method DIN EN 100 015/1 & ANSI/ESD-S11.11.
If meter is purchased with the accessory kit, it will comply to IEC 61340-4-1, ANSI/ESDA S1.4 & ANSI/ESDA S. 7.1 when the five punch electrodes are used.
AE-780 Surface Resistane Meter Includes:
Tester
Two accordion cables (stereo to banana)
9 volt battery
Certificate of calibration
AE-780-1 Accessory kit:
Two 5lb probes
Foam lined carrying case
Limits:
Resistivity: 10e3-10e12 ohms/sq
Resistance: 10e3-10e12 ohms
Measuring voltage: 10v and 100v
Specification:
Dimension: -approx. 173x76x30mm
Weight: -approx. 103 grams
Power: - Battery operated 9V
Connections: - 2x3.5mm jack plug for each earth connection
Test range: 10e3 to 10e 12
Dissipative range: 3x10e5 to 3x10e9 1/2 decade between each decade on a logarithmic scale
Example: 1x105x2.31=3x10e5 (1/2 decade measurement) x3.21= 1x10e6
Method of measurement:
Surface Resisitivity: (ohms per square)
Point to Point resistance: (ohms)
Accuracy: +/-0.5 decade in conductive range
+/-0.25 decade in dissipative range
Address:
Yong Qing No. 3 Industrial Estate, Dao Jiao Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Electrical & Electronics
Main Products:
ESD Equipment, ESD Shoes, Ionizors
Company Introduction:
Armeka engineering Ltd has been offering ESD products and services for almost two decades. During that time the company has developed into the leading ESD expert company globally. Armeka engineering Ltd is a comprehensive manufacturer of static charge controlling and elimination equipment.
We offer our customers a full ESD service; Training, consulting, planning and construction of ESD protected areas. We can supply all the necessary materials, products, and measuring devices for ESD protection. Armeka engineering Ltd has trained and consulted worldwide for both large and small companies for years.
We have customers all over the world, including Asia, Middle East, Europe, USA and Russia. Our business is based on the true knowledge and expertise on ESD-protection. As a manufacturer we are able to monitor the quality of our products closely and develop the products further according to our customer′s feedback.
The ESD epoxies developed by armeka engineering Ltd meet the highest ESD requirements. Our ESD epoxies are one of the very few products around the world able to fully meet the rigorous demands for electric conductive properties according to the standards set by international ESD norm iec 61340-5-1/2.
We have long experience on installing ESD surfaces; Both floor mats and ESD epoxy coatings, which demand very special know-how. During the last 10 years we have installed hundreds of thousands of square meters of ESD epoxy coatings around the world. And the ESD properties of the earliest epoxy installations are as good as after installation!
We offer our customers a full ESD service; Training, consulting, planning and construction of ESD protected areas. We can supply all the necessary materials, products, and measuring devices for ESD protection. Armeka engineering Ltd has trained and consulted worldwide for both large and small companies for years.
We have customers all over the world, including Asia, Middle East, Europe, USA and Russia. Our business is based on the true knowledge and expertise on ESD-protection. As a manufacturer we are able to monitor the quality of our products closely and develop the products further according to our customer′s feedback.
The ESD epoxies developed by armeka engineering Ltd meet the highest ESD requirements. Our ESD epoxies are one of the very few products around the world able to fully meet the rigorous demands for electric conductive properties according to the standards set by international ESD norm iec 61340-5-1/2.
We have long experience on installing ESD surfaces; Both floor mats and ESD epoxy coatings, which demand very special know-how. During the last 10 years we have installed hundreds of thousands of square meters of ESD epoxy coatings around the world. And the ESD properties of the earliest epoxy installations are as good as after installation!
