Birch UV Plywood for Furniture

UV Birch Plywood

1. Thickness: 18mm
2. Size: 4'*8' (1220mm*2440mm)
3. Species: Red Oak, Birch
4. Surface Treatment: High Gloss Type (Sunshine Type)
Semi-gloss Type (Matte Type, Moonlight Type)

We produce birch UV plywood, red oak plywood/MDF, veneer faced (Sapele/Chinese Ash/Teak) plywood/MDF, white/black polyester MDF/plywood, film faced plywood, melamine faced plywood, slotted plywood. Our products are mainly exported to North America, MID East, Africa, Southeast Asia etc.

Core Material: Poplar, birch, combi, etc.
Face/Back: Birch, red oak, ash, teak, sapele veneer on face or on both sides
Okoume, Bintangor on back
Glue: E1, E2, WBP and Melamine
Application: To make the door and countertop for Kitchen Cabinet, Wardrobe,
Bathroom Cabinet and other furnitures. Decorative Panel for interior and outdoor wall.
Packing: Inner packing: Inside pallet is wrapped with a 0.20 mm plastic bag.
Outer packing: Pallets are covered with plywood and then PVC / steel tapes for strength.
Delivery Detail: Within three weeks after receipt buyer's down payment or L/C.
Payment: T/T (30% in advance and 70% balance after B/L copy) or L/C at sight
Port: Qingdao Port

Features:
1. Tinted UV can be done on birch or poplar plywood.
2. Moisture-proof available as well as low formaldehyde emission.
3. In our products there is no void or core lap. Our product is free of warping.
4. Our product can be put in boiling water for 12 hours without delamination.
5. The moisture content is <12%
6. The thickness tolerance can be from +/-0.2-0.5mm
7. Special sizes are available

Most of our products are exported to Egypt, India, USA, Australia, South Africa, Middle East etc. Please visit our company webpage and welcome to our factory anytime.

If you have any advice and demand, please feel free to contact me, hope we can have opportunity to cooperate with you on the basis of equality and mutual benefit, thanks.