Basic Info.
Network Site
Intermediate Node Routers
Transfer Rate
10/100/1000Mbps
Performance
Line-Rate Router
Architecture
Single Bus Symmetric Multi CPU
Transport Package
Neutral Packaging
Product Description
Product DescriptionComFi W500 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi W500 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 3000Mbps, which can build a stable and high-speed wireless network for users. ComFi W500 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi W500 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi W500 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect.ComFi W500 supports standard 48V PoE power supply and pole installation, and the installation and configuration are flexible and convenient. Users only need to spend a short time to complete the settings, you can enjoy the fun of surfing the Internet.Product Features5G Cellular NetworkSupport 5G NR mobile operator's networks. It is compatible with 5G networks of major operators in the market and backward compatible with 4G LTE and 3G WCDMA networks.Wi-Fi6 (IEEE 802.11ax) Standard- 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience.
- Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac.
- Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM).
- Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency.
- Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference.
- Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life.
Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO)Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios.High-Speed AccessSupports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps.5GHz PriorityThe AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience.High-level Protection- It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -30°C to +65°C and adopts IP68 waterproof and dustproof design. Ethernet interface supports
- 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use;
- Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability;
External IndicatorThe external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time.Hardware Specifications Model | W500 |
Dimension | 240mm x 195mm x 80mm (L x W x H) (Including N-Type connector) |
Weight | 1553g |
Installation | Wall or Pole Installation |
LED Indicators | PWR / NET / 2.4GHz / 5GHz |
Interfaces | 1 x GbE Uplink, Support 802.3at Power Supply 1 x SIM Card Slot Interface 4 x N-Type Antenna Connector (5G) 2 x N-Type Antenna Connector (WIFI) |
Power Input | 50V ~ 57V, 802.3at PSE |
Environment |
Operating Temperature | -40°C to +70°C |
Storage Temperature | -40°C to +85°C |
Operating Humidity | 5% - 95% (non-condensing) |
Air Pressure | 86kPa ~ 106kPa Altitude |
IP Rating | IP67 |
Safety Certification | SRRC, can do according to the customer's request |
Stability |
Annual Failure Rate | AFR < 1.5% (Continuous Operation Status) |
Chipset Solution |
CPU | MTK MT7981BA+MT7976CN+MT7531AE |
Flash | 32MB SPI NOR Flash |
RAM | 256MB DDR3L Memory |
Wi-Fi Characteristics |
Wi-Fi Standards | 2.4GHz: 802.11b/g/n/ax 5GHz: 802.11a/n/ac/ax |
Max Speed Rate | 2.4GHz: Max. 574Mbps 5GHz: Max. 2400Mbps |
Antenna | 2 x Fiberglass Antenna and 2 x Internal Antenna |
Working Frequency | 2.4GHz Radio: 2.4000GHz ~ 2.4835GHz |
5GHz Radio: 5.150 ~ 5.850GHz |
Max. Transmit Power | 2.4GHz Radio: 24±2dBm@MCS0, 21±2dBm@MCS7 5GHz Radio: 24±2dBm@MCS0, 21±2dBm@MCS7 |
Data Rate | 2.4G Radio: 802.11b: 1, 2, 5.5, and 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n HT20/HT40: MCS0~MCS15 (400/ 800ns GI) 802.11ax HE20/HE40: MSC0 ~ MCS11 (400/ 800ns GI) |
5G Radio: 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54Mb/s 802.11n HT20/ HT40: MCS0~MCS15 (400/ 800ns GI) 802.11ac VHT20/VHT40/VHT80: MCS0 ~ MCS9 (400/ 800ns GI) 802.11ax HE40/HE80/HE160: MSC0 ~ MCS11 (400/ 800ns GI) |
Reception Sensitivity | 802.11 b : -90 dBm@ 11 Mbps 802.11g : -77dBm @ 54 Mbps |
802.11n: | HT20 | HT40 | MCS7 | -73dBm | - 72 dBm | MCS 11 | - 65 dBm | - 61 dBm |
|
2.4GHz 802.11ax: | HT20 | HT40 | MCS 11 | - 62 dBm | -6 1 dBm |
|
5.8GHz 802.11ax : | HT20 | HT40 | HT80 | MCS 11 | - 63 dBm | -62dBm | - 62 dBm |
|
5G Sub-6 NR Technical Specifications Cellular Technology | 5G Sub-6 GHz |
Frequency Bands | 5G NR (NSA) | n41/n77/n78/n79 |
5G NR (SA) | n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/ n40/n41/n48*/n66/n71/ n77/n78/n79 |
LTE-FDD | B1/B2/B3/B4/B5/B7/B8/B12/B13/ B14/B17/B18/B19/B20/B25/B26/ B28/B29/B30/B32/B66/B71 |
LTE-TDD | B34/B38/B39/B40/B41/B42/B43/ B48 |
LAA | B46 |
WCDMA | B1/B2/B3/B4/B5/B6/B8/B19 |
Data Transmission | 5G SA Sub-6 | Max. 2.1Gbps (DL) / Max. 900Mbps (UL) |
5G NSA Sub-6 | Max. 2.5Gbps (DL) / Max. 600/650Mbps (UL) |
LTE-FDD | Max. 1Gbps (DL) / Max. 200Mbps (UL) |
WCDMA | Max. 42Mbps (DL) / Max. 5.76Mbps (UL) |
Antenna | Cellular x 4, GNSS x 1 |
GNSS | GPS/GLONASS/BeiDou (Compass)/Galileo |
MIMO | DL: 4 x 4, UL: 2 x 2 |
Antenna Type | External Antenna |
*600 Mbps is the typical value; while 650 Mbps is the theoretical data rate when the UL 256QAM of both LTE and 5G NR are enabled (LTE UL 256QAM in EN-DC is disabled by default and has not been deployed by operators, and it is not fully tested).
Address:
Floor 4, Building 5, Tongfukang Shuitian Industrial Zone, Shuitian Community, Shiyan Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Movingcomm Technology specializes in R&D, production, sales, and service of wireless communication equipment, internet of things terminal products and solutions. The products of the company include wireless AP, Industrial routers, LTE, IoT smart terminals.