FRP Panel Water Tank

SMC FRP panel Water Tank
SMC modular water tank is currently widely used in the international new water tank. 
By the State Building Materials Bureau of FRP Research and Design Institute developed, 
Beijing Institute of Architectural Design. Its unique performance to solve the concrete 
tank weight, easy to leak, easy to long moss and steel tank water tank corrosion and rust 
coating off the water pollution and other issues, with good water quality, no leakage, light 
weight, beautiful appearance , Long life and easy installation and so on. The water tank 
for the national "seven five" key scientific and technological projects, the water tank has 
been included in the national "eight five" during the focus of the promotion of new 
product projects.

SMC modular water tank for industrial and mining enterprises and institutions, 
residential, hotels, restaurants and other public buildings. As the living water, fire water 
and water quality requirements of food, medicine, health and other industries necessary 
water storage facilities.

SMC modular water tank is made of SMC molded veneer sealing material, metal 
structure and piping system assembled, can be assembled according to user needs 
1 m3 - 1000 m3 of the water tank, if the original water tank needs to be updated, do not need 
to divert the house, by the door People molded veneer, can be assembled, highly 
penetrating, to the design and construction belt
To great convenience. General water tank according to the standard design, special 
large water tank to be specially designed.
Water tank sealing is a specially developed stereotypes products - sealing tape, the seal 
with non-toxic, water, flexible, permanent deformation of small, the use of more than 30 
years

Specifications and performance
SMC molded panel specifications (for other specifications can be negotiated):
1000 x 1000 mm, 1000 x 500 mm, 500 x 500 mm;
★ thickness of 5mm, 8mm, 10mm, 12mm, 14mm.
16mm; 5mm thickness of the board dedicated to the tank cover.
★ SMC molded water tank implementation of national building materials industry 
standards: (JC658.1- 1997)
 
Installation precautions
SMC modular tanks are designed and manufactured for storage of potable water. Do 
not store hot water and other liquids (chemicals, oil, etc.);
Site construction: before construction, please install the basic requirements of the bar, to 
provide construction power and check the seal with water;
To avoid the fire next to the tank: the welding operation, to take protective measures, do 
not make Mars splashing water tank board;
To prevent the infiltration of pollutants from the outside or immersed in the tank, for the 
maintenance of inspection is convenient and safe, in the water tank around the need to 
leave some space; SMC molded veneer do not hit the sharp corners, do not use tools and other hard things 
beat; In order to prevent the expansion of the pipe, contraction, partial load and shock, the 
water tank, the outlet pipe must be rubber flexible joints (telescopic joints), take over the 
weight should be supported, do not act on the water tank;
SMC water tank maintenance: clean the inside and outside the tank, please use a soft 
device scrub; long time without water, before use the first discharge of water, and clean 
up before use.
Newly installed SMC water tank, must be cleaned twice before they can be put into use.