| |
1.380V/3Phase/50Hz (24hours working) | |
2.use materials: raw PP or PE (can be mixed with recycled material) | |
3.Max Board width: 1600mm | |
4.Board thickness:2mm-10mm, two moulds | |
single screw extruder of SJ-120/33 | |
Vacuum Loading Device | |
Main parameter | |
Screw diameter | 120mm | |
Screw length diameter ratio | 33:1 | |
screw | 38CrMoAIA under nitrogen treatment | |
barrel | 38CrMoAIA under nitrogen treatment, and water cooling compulsive material-supply section, | |
Depth of nitration layer of screw | 0.4-0.6 mm hardness: HV>740 | |
Depth of nitration layer of barrel | 0.5-0.7mm hardness: HV> 940 | |
Barrel heating | 8 sections heating, cast aluminized heating circle with power capacity of 5KW*8 sections | |
Max capacity | 250-300kg/h | |
| |
Reduction gearbox | reduction gearbox of hard-tooth surface. Material of gears is 20CrMoTi and under nitrogen, quenching and teeth-grinding treatment. It is equipped with outer cooling device. Bearings and oil sealing are all imports. The reduction gearbox possesses features of heavy loading capacity, stable transmission, low noise, high efficiency, etc. | |
Drive power | AC motor 110KW SIEMENS CHINA | |
| |
Equipped with fast-speed screen-changer | equipped with hydraulic pressure station, screen-changing without stopping the machine Oil pump is 3kw. 10L/16Mpa gas saver | |
Material of die head | 5CrNiMo steel under heating treatment. And the inner side and outer side are under chrome-plating treatment. | |
Die head mode | coat-hanger running channel. | |
Die head heating | heating rod with adjustment range of 150ºC-300ºC | |
Valid width of products | 1700mm | |
thickness | 2-10mm | |
Lathe | quantity 1 set | |
The central height can is adjustable and it can move from forward to backward. | |
| |
Calibrating device(use two section calibration) | |
Vacuum forming mould | 1 set, and two groups forming | |
Width of forming mould: | 1750×600mm | |
vacuum system | Roots blower | |
power of vacuum pump | 15KW | |
Temperature-controlling of mould | water-circulating 1set | |
Material of water tank | stainless steel | |
(1)Calibrating table is the welded steel structure, four wheels can adjust. | |
(2)calibrating device can move on the guiding route under the reducing motor's driving | |
(3)two body bracket are used for fixing the top board | |
(4) 2 pairs of shape metal plate made of steel and chrome-plated, and adopt a new structure is not cutting edge design. | |
(5)Stereotypes board's opening and closing adopts pneumatic cylinder (total 4),electromagnetic valve control | |
(6) 2-way independent of water temperature-controlled central station, used to control the shape mould temperature | |
We offer the moulds according to customer samples | |
| |
Auxiliary machine for hollow grid plate | |
A)Five-roller hauling off | |
Roller specification: | 250*1750mm | |
Five groups of rollers | 2 roller for each group | |
Material of traction roller: | adopts excellent steel-roller under heating treatment, and the surface covered with 15mm rubber | |
Open and close of roller barrel | adopts electric magnetic valve | |
Speed of traction roller: | Max. 10m/min | |
Trans type | Gear way | |
Power of traction | Electrical motor of 5.5kw with AC frequency control. | |
| |
B)Infrared ray constant temperature tank | |
Heating mode | heat with electric, and the max temperature is 150ºC | |
Temperature-controlling | adopts intelligent temperature controller | |
Opening mode | cylinder | |
Power | 24KW | |
| |
If the surface of hollow board need to be printed , then , need to add the corona device . Note: Corona treatment device | |
Model: 1600mm single surface treatment | |
Voltage: 380V3P50HZ | |
Power: 6kw | |
Electrode holder: | |
(1) single-sided process, two-cylinder open, closed with a row of ozone interfaces; | |
(2) aluminum electrode rotating six teeth, to deal effectively with a width of 2050 mm | |
(3) Corona roller: φ100 * 2100mm one. Electrode holder: | |
C)Cooling bracket | |
Length of bracket | 2meters | |
Material of carrier roller | stainless steel | |
D)Second-time hualling off equipped | |
with the vertical trimming devices (slice the board into pieces ) the width can be adjusted . | |
Diameter of traction roller | 250×1750mm | |
Material of traction roller | adopts excellent steel-roller under heating treatment, and the surface covered with 15mm rubber | |
Groups of traction roller: | 3 groups and 2 roller for each group | |
Open and close of roller barrel | adopts electric magnetic valve | |
Max speed of traction roller | 10m/min | |
Power of traction | Electrical motor of 4kw with AC frequency control. | |
| |
E)Landscape following cutting machine | |
Cutting width | 1600mm | |
Cutting thickness | 10mm | |
Sliding power of cutting | electrical motor of 1.5kw with frequency control, equipped with AC frequency converter. | |
Metering mode | electricity coding metering | |
Cutting mode | automatic cutting | |
| |
Final product stacker: | |
Electrical parts: | |
Adopts the SIEMENS contactor, ABB Invertor, intelligent temperature controller is OMRON brand | |
| |
| | | | | | |