Product Description
Company Info
Product Description
1. APPLICATION
Widely used for distribution and transmission line for reactive power compensation, improves the power factor and reduces the losses; Connected with the filter reactor, resistor composed of the filter device filtering out the harmonic current and improving the power quality.
2. STANDARD
GB/T 11024.1 2001
IEC 608711: 1997 (Shunt capacitor forAC power systems having a rated voltage above 1 kV Part I: General performance testing and rating-safely requirement Guide for installation and operation)
3. TECHNICAL PARAMETER
Rated capacity: 100kVar~667kVar
Rated vfltage: 1~20kV
Rated frequency: 50Hz / 60Hz
Rated current: 30~150A
Solid dielectric: Polypropylene Film
Impregnatioli medium: (M/DBT) \ PXE
Discharge Resistor: Built-in High voltage glass glazed resistor
Capacity torlerance: -5%~10% (Shunt Capacitor)
Loss of Tangent: ≤0.0003 Or ≤0.0005 (Built-in discharge resistor and internal fuse)
4. CONSTRUCTION
Capacitor used all film dielectric, update new insulation oil (M/DBT or C 101) and foil folded construction. Greatly enhances the withstand voltage strength, improves the partial discharge performance, reduces the reactive losses. Built-in discharge resistor can lower the residual voltage from f2Un to 75kV below within 5 Minute after disconnected from the power.
5. USING CONDITION
Temperature range: -40~55
Mounting site: Outdoor or indoor
Altitude: ≤1000m
Other condition: The mounting place shall be free from all harmful gas or steam, electrically, explosive dust and strong mechanical shock.
6. ENCLOSURE OF CAPACITOR
Material of enclosure: Stainless steel or Steel Plate Surface treatment: Coated two layer anti-rusted paint after under Sand blasting processing
Surface color: Light gray
7. TERMINAL
Bushing: Brown color and high strong porcelain. Single phase capacitor have one or two bushing; Three phase capacitor have three bushing.
8. MOUNTING WAY
Upright or lay-side
9. POWER CAPACITOR MODE AND DATE SHEET
Shunt capacitor: See Table 1
Filter capacitor: See Table 2
Outline drawing: See Drawing 1~4
10. ORDERING INSTRUCTION
The purchasers shall make a confirmation toward items 2-3, and 5-9 clauses. If the
End-userrequires special specification which is different from specified here, welcome to negotiated with our and making a note in the contract or the technical agreement for certain mode, quantity and delivery.
11. PRODUCT MODE INDICATION
For example: B AM 11/√3 - 334- I W
1. Code No.: A: Filter capacitor B: Shunt capacitor
2. Dielectric No.: AM: All film M/DBT or C101 BM: All film PXE
3. Rated voltage: KV
4. Rated capacity: KVar
5. PhaseNo.: " 1" is single; "3' is three phase
6. "W": Indicated for outdoor used only; If blank: Indicated for indoor used only.
Widely used for distribution and transmission line for reactive power compensation, improves the power factor and reduces the losses; Connected with the filter reactor, resistor composed of the filter device filtering out the harmonic current and improving the power quality.
2. STANDARD
GB/T 11024.1 2001
IEC 608711: 1997 (Shunt capacitor forAC power systems having a rated voltage above 1 kV Part I: General performance testing and rating-safely requirement Guide for installation and operation)
3. TECHNICAL PARAMETER
Rated capacity: 100kVar~667kVar
Rated vfltage: 1~20kV
Rated frequency: 50Hz / 60Hz
Rated current: 30~150A
Solid dielectric: Polypropylene Film
Impregnatioli medium: (M/DBT) \ PXE
Discharge Resistor: Built-in High voltage glass glazed resistor
Capacity torlerance: -5%~10% (Shunt Capacitor)
Loss of Tangent: ≤0.0003 Or ≤0.0005 (Built-in discharge resistor and internal fuse)
4. CONSTRUCTION
Capacitor used all film dielectric, update new insulation oil (M/DBT or C 101) and foil folded construction. Greatly enhances the withstand voltage strength, improves the partial discharge performance, reduces the reactive losses. Built-in discharge resistor can lower the residual voltage from f2Un to 75kV below within 5 Minute after disconnected from the power.
5. USING CONDITION
Temperature range: -40~55
Mounting site: Outdoor or indoor
Altitude: ≤1000m
Other condition: The mounting place shall be free from all harmful gas or steam, electrically, explosive dust and strong mechanical shock.
6. ENCLOSURE OF CAPACITOR
Material of enclosure: Stainless steel or Steel Plate Surface treatment: Coated two layer anti-rusted paint after under Sand blasting processing
Surface color: Light gray
7. TERMINAL
Bushing: Brown color and high strong porcelain. Single phase capacitor have one or two bushing; Three phase capacitor have three bushing.
8. MOUNTING WAY
Upright or lay-side
9. POWER CAPACITOR MODE AND DATE SHEET
Shunt capacitor: See Table 1
Filter capacitor: See Table 2
Outline drawing: See Drawing 1~4
10. ORDERING INSTRUCTION
The purchasers shall make a confirmation toward items 2-3, and 5-9 clauses. If the
End-userrequires special specification which is different from specified here, welcome to negotiated with our and making a note in the contract or the technical agreement for certain mode, quantity and delivery.
11. PRODUCT MODE INDICATION
For example: B AM 11/√3 - 334- I W
1. Code No.: A: Filter capacitor B: Shunt capacitor
2. Dielectric No.: AM: All film M/DBT or C101 BM: All film PXE
3. Rated voltage: KV
4. Rated capacity: KVar
5. PhaseNo.: " 1" is single; "3' is three phase
6. "W": Indicated for outdoor used only; If blank: Indicated for indoor used only.
Address:
No. 18 Ronggui Road, Shunde District, Foshan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery
Main Products:
Power Capacitor, Film Capacitor, High Voltage Capacitor, Low Voltage Capacitor, Power Factor Correction, Power Compensation
Company Introduction:
We are a joint venture and high-tech enterprise which is specialized in all series of high/low voltage, anti-harmonic, filter shunt power capacitor and complete sets installations. At the same time, we are also the only one manufacturer which is manufacturing the high voltage shunt power capacitor and complete sets installation in southern. Our company accout for 15000sqm2. We introduced advanced equipment such as winding machine, fine vacuum impregnation equipment from American, Switzerland, German respectively. Greatly boost the production capacity and efficiency. WIth more than 20 years abundant manufacturing power capacitor experience, producing both excellent in quality and environment protection items. It′s well received a high reputation from all over the world due to the safety. We are willing to serve the clients better with higher quality and make perfect in practice constantly.
