Product Description
Company Info
Product Description
APPLICATION
Widely used for the distribution and transmission line system for reactivepower compensation; Correct the power factor, reduce the losses.
TECHNICAL PARAMETER
Rated capacity: Single Phase: 1667~6667kVar Three phase: 1000~10000kVar
Rated voltage: 3.15~38.5kV
Rated Current: 105~550A
Capacitor Unit: Adopts built-in internal fuse shunt capacitor
Capacitor torlerance: 0~10%
Loss of tangent: ≤0.0005
Ifgas insulation products shall be including:
Rated capacity: Single phase: 1667~3334kVar Three phase: 1000-10000kvar
Rated pressure:
0.030MPa(20, using temperature from -25-45)
0.040MPa(20, using temperature from -40-40)
Pressure range: 0.005~0.065MPa
Annual gas leakage ratio: <1% / year
0 Pressure Meter Performance: All the product had passed the type test and
Finished test under the 0 pressure meter.
Operation temperature: Enclosure temperature rise ≤10, Internal Max hot Spot
Temperature ≤70
Partial discharge: Under 1.5UN, the capacitor unit partial discharge volume ≤50pC
CONSTRUCTION
Assembling capacitor bank consists of Body, container, lead wire bushing and relevant parts. The body composed of certain full hermetically shunt capacitor units in series and parallel fixing on the steel frame and the container is made of steel plate by welding. All of the capacitors body assembly together inside the container filling with full insulation dielectric (transformer oil or SF6 gas) The heat will pass onto to the container and
Dismiss it in the open air. On the top of the container, There is a lead wire
Bushing and oil- filled pillow type can (filled with the transformer oil), pressure discharge device or electricity connection point pressure meter(filled with SF6 gas).
USING CONDITION
Temperature Range: -40~55
Mounting Site: Indoor or Outdoor
Altitude: ≤1000m
Other Condition: The mounting place shall be free from all harmful gas or
Steam, electrically, explosive dust and strong mechanical shock.
CONDITION
Material: Steel plate
Surface treatment: Coated two layer paint after under sand blasting processing.
Surface color: Light gray
TERMINAL
Bushing: Brown color and high strong porcelain. Single phase have two or three bushing;
Three phase have six or nine bushing for differential voltage protection.
FEATURE
The assembling high voltage shunt capacitor have small occupy area, high reliability, easy
For mounting and maintenance, low operation cost feature. Suitable for huge power substation for outdoor concentrated compensation, Urban power grid re-constructed project and so on.
Assembling high voltage shunt capacitor mode data sheet.
Ordering Instruction
The purchasers shall make a confirmation toward item 2-3, and 5-9 clauses.
Ifthe end-users require special specification which is different from the specified here, welcome to negotiated with us and make a note in the contract or the technical agreement for the mode, quantity and delivery period.
Widely used for the distribution and transmission line system for reactivepower compensation; Correct the power factor, reduce the losses.
TECHNICAL PARAMETER
Rated capacity: Single Phase: 1667~6667kVar Three phase: 1000~10000kVar
Rated voltage: 3.15~38.5kV
Rated Current: 105~550A
Capacitor Unit: Adopts built-in internal fuse shunt capacitor
Capacitor torlerance: 0~10%
Loss of tangent: ≤0.0005
Ifgas insulation products shall be including:
Rated capacity: Single phase: 1667~3334kVar Three phase: 1000-10000kvar
Rated pressure:
0.030MPa(20, using temperature from -25-45)
0.040MPa(20, using temperature from -40-40)
Pressure range: 0.005~0.065MPa
Annual gas leakage ratio: <1% / year
0 Pressure Meter Performance: All the product had passed the type test and
Finished test under the 0 pressure meter.
Operation temperature: Enclosure temperature rise ≤10, Internal Max hot Spot
Temperature ≤70
Partial discharge: Under 1.5UN, the capacitor unit partial discharge volume ≤50pC
CONSTRUCTION
Assembling capacitor bank consists of Body, container, lead wire bushing and relevant parts. The body composed of certain full hermetically shunt capacitor units in series and parallel fixing on the steel frame and the container is made of steel plate by welding. All of the capacitors body assembly together inside the container filling with full insulation dielectric (transformer oil or SF6 gas) The heat will pass onto to the container and
Dismiss it in the open air. On the top of the container, There is a lead wire
Bushing and oil- filled pillow type can (filled with the transformer oil), pressure discharge device or electricity connection point pressure meter(filled with SF6 gas).
USING CONDITION
Temperature Range: -40~55
Mounting Site: Indoor or Outdoor
Altitude: ≤1000m
Other Condition: The mounting place shall be free from all harmful gas or
Steam, electrically, explosive dust and strong mechanical shock.
CONDITION
Material: Steel plate
Surface treatment: Coated two layer paint after under sand blasting processing.
Surface color: Light gray
TERMINAL
Bushing: Brown color and high strong porcelain. Single phase have two or three bushing;
Three phase have six or nine bushing for differential voltage protection.
FEATURE
The assembling high voltage shunt capacitor have small occupy area, high reliability, easy
For mounting and maintenance, low operation cost feature. Suitable for huge power substation for outdoor concentrated compensation, Urban power grid re-constructed project and so on.
Assembling high voltage shunt capacitor mode data sheet.
Ordering Instruction
The purchasers shall make a confirmation toward item 2-3, and 5-9 clauses.
Ifthe end-users require special specification which is different from the specified here, welcome to negotiated with us and make a note in the contract or the technical agreement for the mode, quantity and delivery period.
Address:
No. 18 Ronggui Road, Shunde District, Foshan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery
Main Products:
Power Capacitor, Film Capacitor, High Voltage Capacitor, Low Voltage Capacitor, Power Factor Correction, Power Compensation
Company Introduction:
We are a joint venture and high-tech enterprise which is specialized in all series of high/low voltage, anti-harmonic, filter shunt power capacitor and complete sets installations. At the same time, we are also the only one manufacturer which is manufacturing the high voltage shunt power capacitor and complete sets installation in southern. Our company accout for 15000sqm2. We introduced advanced equipment such as winding machine, fine vacuum impregnation equipment from American, Switzerland, German respectively. Greatly boost the production capacity and efficiency. WIth more than 20 years abundant manufacturing power capacitor experience, producing both excellent in quality and environment protection items. It′s well received a high reputation from all over the world due to the safety. We are willing to serve the clients better with higher quality and make perfect in practice constantly.
