RFID Card Hy241he

1,Description:
    The non-contact card reader hardware and software technology is based on the development of a self-frequency card, HID compatible reader. Full compliance with HID card transfer protocol, this product is low power, environmentally friendly design and manufacture of devices.
This product is mainly used for Access Control System can be installed at the door. The controller with the completion of various use.
Can completely replace the imported products.
2,Product Performance:
Voltage  :                      DC9V-15VDC (±5%)
Current  :                        <50 mA

Interface :                     Wiegand26/34/36/37 etc.
Support Agreement:                 HID Low Frequency Card Transfer Protocol and EM card

Prompted the state:                 ColorLED
1 buzzer
Operating temperature:       -20°C to +65°C 
Storage temperature:         -40°C to +70°C
Humidity:                          0 ~ 95% (Non-condensing)
Protection class:               IP65(Product filling epoxy)

3,WiegandData definition:
Data0 and Data1 : In the case of no data output, are high.
Logical definition
Data bit 0  In Data0 line width of 50us to produce a low level.
Data bit 1  Data1 produce a line in width 50us low level.
The length of each data 2ms.
Description of output
Output: W26 is 3Bytes ,  W34 is 4Bytes.
About Parity
In the first half of the data of the preceding part of the data parity bit, the last one the latter part of the data plus parity bit odd.
For example:
Number : 6B 3D 12 D6
Output data: 3D 12 D6
Wiegand26 Coding:
4,Keyboard Reader keyboard data format:

Wiegand data (4BIT Mode)The Wiegand output mode compatible with the HID keyboard.
The model's default keyboard for our company output format, there are no special requirements
of the client in the case, use this mode.

WiegandDATA(8BIT mode)The low 4bit output mode for the keyboard keys, keyboard keys for the high-4bit negated.

Wiegand DATA(6-digit password mode):
The model output length of 26bit, follow the format described above on Wiegand26.
1:*  is Clear button when the input, the previous input is cleared, all to 0.
2:#  is Confirm the output button, when the input, the input before being combined into a Wiegand26 data output.
3:When the key output of less than 6, the high complement of 0.
For example:When the button '1 ', '2', '3 ', '4', '5 ', '6','#' ,Output data for the three bytes 0x12 0x34 0x56.
5,Wiring:
      HID 6005B


HID KEY-pad Reader