Hydraulic Double Cylinder Thermoplastic Preheater

1.Product Introduction:
The hydraulic double cylinder thermoplastic pre-heater is the major equipment used for melting hot melt paint. It may the fuel oil.
2.Product Features:
The equipment is equipped with high quality diesel engine ,electric starter and overload protection device.Hydraulic drive and stepless speed regulation system are adopted in it which support high load operation  and forward and reverse mix. The suspensory cylinders ensures uniform heating and no distortion; The burners can be adjusted in fire power and flame height.The heat-insulation system is the best in energy saving and efficient.
It is of stable property,handy operation,high thermal efficiency, good heat preservation and so on.
3.Technical data:
4.Application
Thermoplastic paint pre-heater, also called hot melt kettle, always matched with thermoplastic machine, is used for heating, melting, and stirring thermoplastic road marking paints continuously, preparing hot melt paints for the thermoplastic road marking machine during long distance road lines marking work. 

Thermoplastic pre-heater can be used in the following areas:
Highways-for guiding and controlling traffic
City roads-for smooth flow of traffic city streets
Airports & runways
Side streets
Parking lots
Railway platform
Bus stops
Zebra crossing 
Bike paths
Motorway etc
5.Warnnig Tips 
1. The temperature is high, so wear gloves before operate the thermoplastic pre-heater to prevent getting burnt.
2. If the thermoplastic paint is wet or there is water in the kettle, please open the cover on the kettle when heated.
3. During the construction, first, put powder coating (additives) into the hot-melt kettle. The heating temperature must be controlled between 180 ºC ~ 220 ºC. 
4. Begain stirring while melting, when the paint into a homogeneous liquid state (above 100ºC). Turn reversing valves in neutral first, when the paddle is completely stopped, then starting the reverse stirring.
5.And then, the hot-melt material is ready to be discharged into the thermoplastic road marking machine for marking construction.
6. Avoiding remaining too much coating after construction. 
7. Regularly check the gas pipe, prevent aging.
8. The melting paint quality affects directly to the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint roadline construction, and essential device for thermoplastic paints heating and melting.