Basic Info.
Breaking Capacity
Low Voltage Circuit Breakers
Speed
Normal Type Circuit Breaker
Arc-extinguishing Medium
Air
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB
Certification
ISO9001-2000, CCC
Trademark
AceRreare/OEM/ODM
Specification
210*341*195
Product Description
Product Description
Product Overview
ARM1E series electronic plastic case circuit breakers (hereinafter referred to as circuit breakers) are suitable for infrequent switching and infrequent starting of motors in circuits with AC 50HZ, rated insulation voltage of 1000V, rated working voltage of 400V and rated working current of 1250A.
The circuit breaker has overload long-delay inverse time limit, short-circuit short-delay inverse time limit, short-circuit short-delay fixed time limit, short-circuit instantaneous and undervoltage protection functions as well as residual current protection (optional) phase failure protection function (optional), which can protect the line and power supply equipment from damage, the circuit breaker has complete and precise protection characteristics, which can improve the reliability of power supply and avoid unnecessary power outages, of which "Z, B "type control with communication interface, can be "four remote" to meet the requirements of the control center and automation system.
According to its rated limit short-circuit breaking capacity, the circuit breaker is divided into L type (standard type), M type (higher breaking type) and H type (high breaking type). The circuit breaker has the characteristics of small size, high breaking capacity, short flying arc and vibration resistance.
The circuit breaker can be installed vertically (i.e., vertical installation), or horizontally (i.e., horizontal installation), and can be installed lying flat.
Circuit breaker with isolation function, the corresponding symbol: "The circuit breaker can not be inverted into the line, that is, only allow 1, 3, 5 connected to the power line 2, 4, 6 connected to the load line.
Envirinment of use
1,The surrounding air temperature state is: -5ºC~+40ºC
2,The altitude of the installation site does not exceed 2000m
3,The relative humidity of the air at the installation site does not exceed 50% at the highest temperature of +40ºC, and can have a higher relative humidity at lower temperatures, such as up to 90% at 20ºC. Special measures should be taken for the occasional condensation due to temperature changes.
4,The pollution level is 3
5, wet and hot band type (TH type) circuit breakers through GB/T2423.4, GB/T2423.18 test requirements, can withstand the effects of humid air, salt spray, oil mist, mold.
6,The circuit breaker should be installed in a place where there is no danger of explosion and no conductive dust, not enough to corrode the metal and destroy the insulation
7, the circuit breaker should be installed in a place where there is no rain or snow intrusion
8,Operating conditions: the circuit breaker passes the test requirements of GB/T 2423.1 and GB/T2423.2, the surrounding air temperature can be as low as -25ºC (ARM1DC/ARM3DC/ARM6DC can provide temperature as low as -40ºC, consult our company), as high as +70ºC (more than 40ºC reduced capacity use, see the technical information in the attached sample)
Product Parameters
Basic Info.
Model | Current shell frame | Rated current (In) | Use Category | Poles | Ue | Icu | Ics | Icw | Ui | Uimp | Mechanical Endurance | Electrical safe life | Flashover distance (mm) |
ARM1E-1250 (800~1250A) | 1250A | 1250A(Ir:800A,850A,900A,950A,1000A,1050A,1100A,1250A Graded regulation) | Class B | 3P | 400V | 80KA | 50KA | 15KA/1s | 1000V | 8KV | 2500 | 500 | ≯100 |
Model | Rated current (In) | Poles | Structure size | Dimensions(W*L*H1) | Dimensions(W*L*H2) |
ARM1E-1250 (800~1250A) | 1250A (Ir:800A,850A,900A,950A,1000A,1050A,1100A,1250A Graded regulation) | 3P |
| 210*341*195 | 210*341*137 |
Detailed Photos
FAQ
1.Q: Are you trading company or manufacturer ?
A: We are manufacturer and specializing in manufacturing good quality of MCCB.
2.Q: How long is your delivery time?
A: Normally 5-10 days if there are goods in stock. Or it will take 15-20 days. For customized items, the delivery time depends.
3.Q: What is your terms of payment ?
A: 30% T/T in advance ,and the balance before shipment.
4.Q : Can you make customized products or packing?
A: Yes.We can offer customized products and packing ways can be made according to customer's requirement.
5.Q: Can you offer mould making services?
A: We have made many mould for different customers for years.Wecan offer DMC Thermosetting Compressionmoulding,Thermoplastic injection moulding,Metal stamping moulding.
6.Q: How about the guarantee period?
A: It varies according the different kinds of product. We can negotiate it before place an order.
7.Q: What is your production capacity?
A: We can produce 3000 sets per month.
8.Q: How about the scale of your factory?
A: Our total area is 7000 square meter. We have 300staffs, .40 engineers.
9.Q: What tests do you have to confirm the quality of the arc chamber?
A: We have a incoming inspection for the raw material and process inspection for the rivet and stamping. There is also final statistical audit which consisting the measurement of sizes, tensile test and coat examine.
10.Q: What are the countries you have exported to?
A: We have not worked directly with foreign customers before, we provide ODM and OEM services for brands in China and then they take our products and sell them to foreign customers, basically to Europe and the Middle East.
11,Q: Your products are really good, but we have seen the same circuit breakers on the market nearby and their prices are much cheaper than yours.
A: First of all, I would like to emphasise that the price is definitely proportional to the quality. If you are a buyer, you must know that the materials and treatment processes used in our products are better than those of our peers, and the quality is recognised in the same industry. Our factory has a thermosetting workshop, thermoplastic workshop, welding workshop, hardware stamping workshop and assembly workshop, and the rate of self-made parts is as high as 80%. We have also built a new factory in Wuhu to guarantee the supply of parts for us, so that the parameters and various technical indicators such as mechanical life, Icu, Ics, etc. are very stable, and the match between parts is very high, and the service life of the finished product is also very long, which is They can be used in high-end industrial areas and hospitals, where the quality of the circuit breakers is very high. We also have our own technology patents and a very professional R&D team of 30-40 engineers to respond to the various needs of our customers, the development cycle of new products only takes 30-40 days, in the process, unconditionally provide you with technical expenses, we can greatly reduce the cost of communication and research and development costs. if particularly urgent, I can apply to my superiors to set up a customer line for you, specifically for you to assemble MCCB.
Address:
Shangwu Village, Qili Port, Liushi Town, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Electrical & Electronics
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000
Company Introduction:
′Acereare′ was Founded in 2015, headquartered in Yueqing Wenzhou, the city of electrical appliances in China. It is a modern manufacturing company which both with trading and factory, researching and development design. The company are strong enough that it owes MCCB accessories production base, MCCB moulding design and production base, MCCB and ACB developing and design base. It has established strategic cooperation relationships with nearly 100 high-end customers at home and abroad. Its products are selling around the China and exported to more than 20 countries and regions around the world.
The company′s products cover: ACB, thermomagnetic MCCB, electronic MCCB, RCCB, photovoltaic and wind energy molded case circuit breakers, double-break molded case circuit breakers and various parts and components.
With mold design and processing atitscore, slow wire cutting, high-precision EDM, CNC machine tools, engraving machinesand other precision processing equipment have the ability to design and manufacture precision molds for stamping, DMC, injection molding, etc
The stamping process realizes the formation of multiple processes in trimming, punching, multi-process bending, screw threading, riveting and blanking allatonce. The parts are transported to the heat treatment workshop with an unmanned forklift. After being modulated, they are transferred to the welding workshop through the building control elevator system. The products are welded by automatic welding equipment.
Acereare is a company with a really strong output capacity that conducted 250 million RMB of business in 2022. With the business development, they plan to expand facilities by 16, 000 square meter to satisfy the growing needs of the customers.