| Specification |
CAS No.: -;
Formula: -;
EINECS: -;
Color: Clear;
Appearance: Liquid;
Main Raw Material: Polyurethane;
Method: Spray;
Level: Top Coat;
Drying Method: Curing Agent;
Substrate: All Surface;
Components: Solvent;
Formation Mechanism: Conversion Type;
Type: Two Component;
Function: Anti UV-Rays;
Feature: Weather Resistance;
MOQ: 20kg;
|
CAS No.: 000000;
Formula: 000000;
Color: Peacock Blue;
Appearance: Liquid;
Main Raw Material: Chlorinated Rubber;
Method: Spray;
Level: Finish Coat;
Drying Method: Air Drying;
Substrate: Steel;
Components: Aluminum Slurry / Anti-Rust Pigment;
Formation Mechanism: Non Conversion Type;
Painting Method: Airless Spraying;
Substrate Temperature: Greater Than 3ºC;
Serviceable Temperature: Minus20ºC - 50ºC;
Fineness: ≤40μm;
Application Property: Barrier-Free Brushing;
Actual Drying: ≤6h;
Covering Power: White, ≤185g/Cm2;
Flexibility: 10mm;
Alkali Resistance: 48h, No Abnormalities;
Solid Content: 45%;
Solvent Insoluble Matter: Below 35%;
Dft: 30μm;
Storage Life: 1 Year;
|
CAS No.: 000000;
Formula: Epoxy;
EINECS: 000000;
Color: Transparent Color;
Appearance: Liquid;
Main Raw Material: Epoxy;
Method: Spray;
Level: Primer;
Drying Method: Drying;
Substrate: Steel;
Components: Solvent;
Formation Mechanism: Conversion Type;
Density: 1.4G/M2;
Matching: 2:1;
Thickness of Dry Film: 20um;
Thickness of Wet Film: 40um;
Theoretical Dosage: 0.94G;
Drying Time: 1h;
Solid Content: 78%;
Glossiness: Matt;
|
CAS No.: 000000;
Formula: 000000;
Color: Red;
Appearance: Liquid;
Main Raw Material: Acrylic;
Method: Spray;
Level: Finish Coat;
Drying Method: Air Drying;
Substrate: Steel;
Formation Mechanism: Conversion Type;
Viscosity (Coating -4): ≥30;
Surface Drying: 1h;
Actual Drying: 24h;
Hardness: 20.4;
Adhesion: Level 2;
Impact Resistance: 40cm;
Flexibility: 2mm;
Resistance to Artificial Aging: 1000h The Film Is Not Damaged;
Water Tolerance: 240h, No Clear Change;
Shelf Life: 1 Year;
|
CAS No.: 000000;
Formula: 000000;
Color: Grey;
Appearance: Liquid;
Main Raw Material: Zinc Powder/Special Purpose Resin;
Method: Brush/Roll/Spray;
Level: Primer;
Drying Method: Air Drying;
Substrate: Steel;
Components: Zinc Powder, Resin, Auxiliaries, Ejectors;
Formation Mechanism: Non Conversion Type;
Dry Film Zinc Powder Content: ≥96%;
Salt Spray Resistance: ≥3000h;
Anti-Sliding Coefficient: ≥0.55;
High Temperature Resistance: 300ºC;
Low Temperature Resistant: -60ºC;
Volume Resistance: 4.2*105Ω.Cm;
Dent Resistance: 50cm;
Density: 2.8±0.2g/Ml;
Executive Standard: Hg/T3668-2009;
Surface Dry: 23±2ºC, ≤0.5h;
Actual Dry: 23±2ºC, ≤18h;
Dft: 40μm;
Wft: 150μm;
Diluent: Special Diluent;
Self Recoating Time: 1h;
|
