Prefabricated Substation with Compact Design for Space-Constrained Environments
Price
Min. Order Reference FOB Price
1 Piece US$16,000.00 / Piece
Sepcifications
- Structure Protection
- Certification ISO9001:2000, CCC, CE, ISO14001, ISO45001, ISO50001
- Form All- packaged Type
- Operation Voltage High Voltage or Low Voltage
- Application Range Buildings and Factories
- Shell Material Stainless Steel
- Shell Protection Grade IP54, IP33, and Others
- Brand Ceeg
- Transport Package International Wooden Case or According to Client′s
- Trademark CEEG
- Origin Jiangsu, China
- Rated Capacity 50-2500kVA
- Primary Voltage 6.3/6.6/10/10.5kv
- Secondary Voltage 0.4
- Frequency 50/60Hz
- Impedance 9%/10.5%
- Connection Symbol Yyn0/Dyn11
- Tapping Range ±2*2.5%/±5%
Product Description
Product Description The CEEG compact substation is an all-in-one solution ingeniously combining high-voltage switchgear, distribution transformer, and low-voltage switchgear. It is expertly crafted for seamless integration in both indoor and outdoor scenarios. This exceptional substation stands out ...
160kVA Compact Prefabricated Substation for Efficient Power Distribution
Cnkeeya Ybm-12/0.4 Prefabricated Substation, Transformer Substation, Distribution Box, Power Distribution
European Box Type Transformer Substation Compact Prefabricated Substation
Toonice 12/40.5 Environmentally Friendly Power Prefabricated Substation
ODM Custom Quick Response Electrical Containerized and Prefabricated Substations
-
Installation and Operation Manual of 35kV Oil-Immersed Transformers The transformer ≤ 4000 kVA is normally transported in a whole. As the moisture absorber and the temperature controller are easy to be bumped therefore transformer is detached before transportation. The transformer ≥ 5000 kVA is transported separately. It is required to discharge insulation oil 100 mm down to the cover of the tank, and all radiator, oil conservator, moisture absorber, temperature controller and high/low voltage sleeves and fan for transformer of 10000kVA and upward should be detached and packed in separate boxes for transportation, and carry enough insulation oil together with the main body for replenishment. -
Inspection, Acceptance, Energization, and Maintenance of Dry Type Transformers In a relatively humid environment, the insulation resistance of the transformer may decrease. Generally, for each 1000V rated voltage, the insulation resistance value should not be less than 2MΩ (measured at 25°C for one minute) to meet operational requirements. However, if the transformer is abnormally humid and condensation occurs, no matter the insulation resistance, it must be dried before a withstand voltage test or operation (the drying method depends on site conditions; the simplest method is to use hot air drying, infrared lamps, or a combination of both.