Specification |
Casting Method: Centrifugal Casting;
Casting Form Material: Metal;
Casting Metal: Alloy;
Casting Form Usage Count: Semi-permanent;
Surface Treatment: Polishing;
Surface Roughness: Ra0.05;
Coating: Anticorrosive Paint;
Machining Tolerance: +/-0.01mm;
Standard: GB/T1504-2008;
Max Barrel Length: 1.2 Meters;
Max Single Weight: 10 Tons/PC;
Taper: Available;
Multiple Thread Holes: Available;
The End of The Roll Is Slotted: Available;
Deep Holes: Available;
Deep Thread Holes: Available;
Customized Roughness: Available;
Lettering: Available;
Inspection: 100% Inspection;
Application: Small Section Steel, Wire, Hot Thin Sheet Mill;
Barrel Hardness: 70-85 Hsd;
Neck Hardness: 32-45 Hsd;
MOQ: 2PCS;
Tensile Strength: Greater Than or Equal to 350n/mm2;
|
Casting Method: Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Iron;
Casting Form Usage Count: Permanent;
Surface Treatment: Galvanized;
Surface Roughness: Ra0.05;
Coating: Zinc oxide;
Standard: GB;
Seam Type: Straight Seam;
Heat Treatment: Vacuum Gas Quenching;
Model Number: Depends on Tube's Model;
Round Pipe Diameter: 4 mm to 273 mm;
Square/Rectangle Wall Thickness: 0.25 mm to 12 mm;
Square/Rectangle Size: 8*8 mm to 260*130 mm;
Round Pipe Wall Thickness: 0.2 mm to 15mm;
Delivery: 90-120days;
Use Life: 50 Years;
|
Casting Method: Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Iron;
Casting Form Usage Count: Permanent;
Surface Treatment: as Per Customer Demand;
Surface Roughness: as Per Customer Demand;
Coating: Anti-Rust Oil;
Machining Tolerance: as Per Customer Demand;
Standard: as Per Customer Drawing;
Machining Facility: 30 Machining Centers+50 Nc Machines;
Dimensions: OEM Customized/Customer′s Drawing;
Heat Treatment: Quench and Temper as Per Drawing;
Inspection: Mt/Ut/Rt/100% Visual+100% Gage/CMM;
|
Casting Method: Sand Casting or Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Iron;
Casting Form Usage Count: Semi-permanent;
Surface Treatment: Polishing;
Surface Roughness: as Drawing;
Coating: as Drawing;
Machining Tolerance: as Drawing;
Standard: GB;
Size: φ200-φ1500;
Material1: Cast Iron, Semi Steel, Alloy Steel;
Material2: Chilled Cast Iron, Indefinite Chill Cast Iron,;
Material3: Ductile Iron,High Chromium Cast Iron,HSS;
Material4: Casting Cr3, Cr5;
Material5: Forging Cr3, Cr5, Cr8;
|
Casting Method: Sand Casting or Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Iron;
Casting Form Usage Count: Semi-permanent;
Surface Treatment: Polishing;
Surface Roughness: as Drawing;
Coating: as Drawing;
Machining Tolerance: as Drawing;
Standard: GB;
Size: φ200-φ1500;
Material1: Cast Iron, Semi Steel, Alloy Steel;
Material2: Chilled Cast Iron, Indefinite Chill Cast Iron,;
Material3: Ductile Iron,High Chromium Cast Iron,HSS;
Material4: Casting Cr3, Cr5;
Material5: Forging Cr3, Cr5, Cr8;
|