Specification |
Material: Linear Low Density Polyethylene/LLDPE;
Usage: General Plastics;
Plastic Properties After Heated: Thermoplastic Plastics;
Color: White;
Appearance: Granules;
Features: Non Slip Agent;
Material Attribute: Extrusion Grade Film Grade Unantiblock Food Contac;
Process: Extrusion Molding Cast Molding;
|
Feature: Hydrolytic Degradable;
CAS No.: 26100-51-6;
Formula: (C3h4o2)N;
EINECS: 201-245-8;
Material: EVOH;
Usage: General Plastics, Engineering Plastics, Specialty Plastics;
Plastic Properties After Heated: Thermoplastic Plastics;
Plastic Forming Method: Injection;
Color: Transparent Pellets;
Melting Point: 183 Degree;
Density: 1.17g/cm3;
Appearance: Granules;
Type: Virgin;
|
Feature: Recyclable;
Formula: PA;
Material: Polyamide(Nylon 6.66)/PA;
Usage: General Plastics, Engineering Plastics, Specialty Plastics, Deburring, Blasting, Polishing;
Plastic Properties After Heated: Thermoplastic Plastics;
Plastic Forming Method: Film Pressure;
Color: White;
Rockwell Hardness: HRC 120;
Moh's Hardness: 4;
Proportion: 1.4~1.5 g/cm3;
Molding Shrinkage: 1.2~1.5%;
Melting Point: 220%;
|
Feature: Hydrolytic Degradable;
CAS No.: 26100-51-6;
Formula: (C3h4o2)N;
EINECS: 201-245-8;
Material: EVOH;
Usage: General Plastics, Engineering Plastics, Specialty Plastics;
Plastic Properties After Heated: Thermoplastic Plastics;
Plastic Forming Method: Injection;
Color: Transparent Pellets;
Mfr: 5.5g/10 Min;
Melting Temperature: 165 Degree;
Vicat Softening Point: 152 Degree;
Tensile Stress at Break: 29 MPa;
|
Feature: Hydrolytic Degradable;
CAS No.: 26100-51-6;
Formula: (C3h4o2)N;
EINECS: 201-245-8;
Material: EVOH;
Usage: General Plastics, Engineering Plastics, Specialty Plastics;
Plastic Properties After Heated: Thermoplastic Plastics;
Plastic Forming Method: Injection;
Color: Transparent Pellets;
Melting Point: 188 Degree;
Density: 1.19g/cm3;
Appearance: Granules;
Type: Virgin;
|