Basic Info.
Process Usage
CNC Non-Conventional Machine Tools
Movement Method
Contour,Linear,Point to Point Control
Control Method
Closed-Loop Control
Numerical Control
CNC/MNC
Performance Classification
Economical CNC Machine Tools
Certification
CE, ISO 9001
Product Description
NEW990TDc 2 axis lathe cnc system (absolute encoder): www.made-in-china.com/showroom/newkye
The advantage of the absolute CNC technology:
1. No need to install machine Zero, also can ensure the accuracy;
2. No need to install a hard limit switch, and never crash;
3.If G00 suddenly power off, need not to tool setting when re-power on;
4. if the processing size is not accurate, the system will alarm directly.
Features:
1.Adopt Modbus technology, ARM technology, DSP technology and FPGA technology.
2.U disk and RS232 interface,U disk DNC function.
3.Network remote technology, online diagnosis system.
4.128M user program space,Infinite numbers of programs.
5.Absolute motor (multi-turn 17 bit) control technology.
6.Max movement speed 300m/min, Processing speed 0.01~30m/min.
7.Interpolation cycle 2ms, control accuracy 0.1um.
8.Grating full closed-loop control technology, processing accuracy≤2um.
9.Short line program pre-reading technology, to meet the high speed engraving cutting.
10.Intelligent man-machine interface.
Function:
Function | Parameter |
Control axis | 2-axis |
Min set unit | 0.001mm |
Max set value | ±99999.999mm |
Max speed | 30m/min |
Feed speed | 0.001~15m/min |
Manual continuous | One shaft or two shaft at the same time |
Interpolation mode | Linear,Circular,thread |
Tool ,tool compensation | Length compensation,tool nose radius compensation |
Tool compensation input mode | Trial cutting measure input mode |
Spindle function | Gear ,dual analog control,rigid tapping |
Hand wheel function | Fixed,external handheld mode |
Handwheel processing function | Program handwheel processing function |
Screen protection function | Have |
Turret function | Row turret,auto turret total 99 pcs |
Communication function | RS232,U disk interface |
Compensation function | Tool ,backlash,thread pitch,radius compensation |
Programming mode | Absolute,relative,mixed programming, |
Limit function | Soft limit,hard limit |
Thread function | Metric/inch system,straight thread,tapered thread ect. |
Pre-reading function | Pretreatment of short lines 10000 rows |
Password-protected function | Multiple layers of password protection |
Input and ourput | I/O 24×24 |
PLC programming | User design PLC function by themselves |
Acc/dec control | Linear acc and dec, exponential acc and dec |
Encoder line | Any value can be set |
User Macro program | Have |
Electronic gear function | Have |
System instructon G code:
Code | Function |
G00 | Rapid positioning |
G01 | Linear interpolation |
G02/G03 | Circular interpolation |
G32 | Tread pitch cutting |
G90 | Cylindrical or conical cutting cycle |
G94 | End surface cutting cycle |
G92 | Thread cutting cycle |
G93 | Tapping fixed cycle |
G71 | Excircle rough turning cycle |
G72 | End surface rough turning cycle |
G73 | Close cutting cycle |
G74 | End surface deep-hole drilling processing cycle |
G75 | Outer diameter grooving cycle |
G76 | Multiple tread cutting cycle |
G22,G800 | Fixed cycle |
G52 | Part coordinate system setup |
G31,G311 | Check skip instruction |
G15,G16 | Polar coordinate programming |
G20,G21 | Metric/inch system programming |
G184,G185 | Setup tool coordinate system |
G54~G59 | Work piece coordinate system setup |
G40,G41,G42 | Tool nose radius compensation instruction |
G60/G64 | Accurate positioning/continue feed cutting |
G96/G97 | Constant surface speed cutting |
G98,G99 | Feed mode |
G26 | Return to program coordinate |
G25,G61,G611 | Return to G25 point instruction |
G28 | Return to reference point |
G04 | Delay instruction |
S,M,T | S,M,T function |
Application:
CNC Lathe machine,Grinding machine,Special lathe machine,ect.
www.made-in-china.com/showroom/newkye
Address:
6-3 Luxi, Fengjiang, Luqiao, Taizhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Taizhou Newkye Electronics CO., Ltd (Hereinafter Newkye company) focuses on the development of CNC system, servo motor, servo driver, stepper motor, stepper driver, hybrid servo motor and driver, spindle, inverter, lubrication pump, water pump design, products and sales.
Above products are widely used in various of industrial automation fields. CNC lathe machine, CNC milling machine, packing machine, drilling machine, grinding machine, gear hobbing machine, embroidery machine, bag making machine, dispenser and other machine tool numerical control transformation and supporting...
Newkye company upholds "customer first, credit-oriented", to create the most practical and ideal products, to serve various fields of society with the business approach of "quality products, excellent service".