Aluminium Template Copy Router

Equipment use:
Equipped with two sets of masters, the φ5 and φ8 milling cutters can be used to copy complex holes to the workpiece.The rectangular hole can be milled by adjusting the stop on the left side of the vertical milling head and the positioning strip on the contour bracket.All kinds of power are moved on the linear motion axis, and the contour pin can be freely rotated, so that the operation is free, light and flexible.The start switch is mounted on the joystick and has a joint bearing on the joystick for easy and convenient operation.Hand pneumatic clamping work, high degree of automation.Rotating the positioning block gives three different milling depths.All linear motion bearings and milling cutters are available in German for durability
The main technical parameters:Workbench area (W x H): 512 × 170mmVertical milling head left and right movement maximum distance: 260mmMaximum distance before and after the vertical milling head: 130mmThe maximum distance between the vertical and vertical milling heads: 100mmEnd mill diameter (maximum): φ8mmEnd mill diameter (minimum): φ5mmEnd mill speed: 12000r/minMotor power: N=1.1kwMotor speed: n=2830r/minPressure cylinder working pressure: 0.6-0.8MpaDimensions (length × width × height): 640 × 660 × 1400mmWeight: 157kg