| Specification |
Application: Electrical Base, Shell, Motor;
Type: Insulation Sheet;
Chemistry: Organic Insulation;
Material: Fiberglass & Resin;
Thermal Rating: B 130;
Maximum Voltage: 35kv;
Classification: Organic Insulating Material;
Color: Green;
Brand: Redsun;
Standard: NEMA or IEC;
Thickness: 0.1-100mm;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Thermal Rating: H 180;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Material: Polyimide;
Thermal Rating: H 180;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.025mm, 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Insulation: Electrical Insulation;
Temperature: High Temperature Resistance;
Protection: Protection of FPC;
Film: Kapton Film;
Label: Pi Label;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Material: Plastic;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.025mm, 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Insulation: Electrical Insulation;
Temperature: High Temperature Resistance;
Protection: Protection of FPC;
Film: Kapton Film;
Label: Pi Label;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Material: Polyimide;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.025mm, 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Tensile Strength: >=165MPa;
Elongation at Break: >=45%;
Dielectric Strength: >=195mv/M;
Shrinkage: <=0.12%;
Joints: <=3;
|
